FECON Blackhawk
|
Quick Look
|
| High Strength steel body construction to withstand the rigors of everyday use |
| A lacing pattern to process material efficiently optimizing production and tool life. |
| Variable displacement 107cc hydraulic motor |
| Optimal sizing for quick spool up and immediate recovery. |
|
JCB Brush Cutter
|
Quick Look
|
|
|
JCB Brush Grapple
|
Quick Look
|
| Q/Hitch configuration maximizes changeover time,gives improved productivity and improves operator safety. |
| Fitted with check valves for greater operator safety. |
| Dual independent grapples hold the material securely in place. |
| Replacement wear parts available to further extend service life. |
|
FECON Compact Stumpex
|
Quick Look
|
| Safer than conventional stumpers due to slow rotation auger bit action |
| Use on any species of wood |
| No carbide tools to replace |
| Low RPM bit leads to easy clean-up and has no high speed flying debris for a safer work zone |
|
FECON Deck Mulcher
|
Quick Look
|
| Fecon Deck Mulchers can mulch smaller materials faster than traditional drum mulchers. |
| A robust bearing carrier houses a heavy-duty bearing with an oversized shaft. |
| Ruggedness and dependability are built-in, designed to enhance performance, service life, and safety. |
| Ideal for right-of-way clearing and maintenance projects, forestry clearing, site preparation, land improvement, highway mulching and maintenance, urban interface, and more. |
|
FECON Disc Mulcher
|
Quick Look
|
| SNIPPING: Cut top of tree with left side of disc, snip into standing tree by lowering the arm and then swinging right to left, repeat process until at ground level |
| HINGED OPEN: Versatile for processing standing and felled material using the left and right swing |
| TOP-DOWN FEEDING utilizing the bottom of the disc to mulch standing trees or come down of brush piles |
| DOOR REMOVED: Optimum for open areas where productivity is key |
|
JCB Forestry Cutting Head
|
Quick Look
|
|
|
FECON Mulching Head
|
Quick Look
|
| Industry leading severe-duty body construction. |
| For lighter material loads, higher RPM means more bites per second and finer material sizing. With heavier material, the Bull Hog delivers more rotor torque keeping the rotor turning when other heads may stall. |
| Heavy steel materials and quality welding process provide strength and longevity. |
| Field tested and proven to be the most productive heads available. |
|
FECON Mulching Head (12-20 Ton)
|
Quick Look
|
| Fecon Grinding Technology (FTG) rotor with Double Carbide tools |
| Attached to an excavator, the Bull Hog forestry mulchers are perfect for clearing trees and brush along roadsides, ravines, creeks, riverbanks, and places that could otherwise be difficult to reach. |
| The Bull Hog is a low-maintenance design, and we provide optional mounts that mate to your machine. |
| Adjustable hydraulics to match carrier flow and pressure |
|
FECON Mulching Head (15-45 Ton)
|
Quick Look
|
| The Bull Hog is a low-maintenance design and we provide optional mounts that mate to your machine. |
| Adjustable hydraulics to match carrier flow and pressure |
| Variable displacement 55cc hydraulic motor |
| Two rotor systems with many cutting tool options — Double Carbide, High Abrasion, Stone Tool, Viking Sword, and Viking Axe. |
|
FECON Mulching Head (5-10 Ton)
|
Quick Look
|
| Variable displacement hydraulic motors optimize rotor speed and torque for maximum production in small or larger material. |
| Variable displacement 45cc hydraulic motor |
| Split ring rotor system with two tool options — Cubit Knife and Cubit Carbide. |
| Adjustable hydraulics to match carrier flow and pressure |
|
FECON Mulching Head (8-15 Ton)
|
Quick Look
|
| Variable displacement 55cc hydraulic motor |
| Includes variable displacement hydraulic motors that optimize rotor speed and torque for maximum production in small or larger material. |
| The Bull Hog is a low-maintenance design, and we provide optional mounts that mate to your machine. |
| Adjustable hydraulics to match carrier flow and pressure |
|