X07 S50 (5-7 tonnes)
X07 S50 (5-7 tonnes)
X07 S50 (5-7 tonnes)
X07 S50 (5-7 tonnes)

An optimized tiltrotator for compact machines using S45/S50

Steelwrist X07 is developed with a focus on agility, building height and weight that is so important for compact excavators. The X07 is optimized for machines from 5-ton where S45 or S50 are used. The X07 is often chosen with a direct mounted top. With a steelcasted structure, the weight can be lightened while strength is maximized. All you need to facilitate your work.

Gear housing, bottom and top in solid cast steel, hardened shafts and piston rods, gripper cassette that can be retrofitted and and central lubrication as option. Delivered with control systems that fit your excavator regardless if you need a two of four hose solution.

Tiltrotator options

Control Systems

XControl if you want to have complete freedom to run all functions simultaneously or four hose system with proportional control from the excavator. Both types of control systems meet the upcoming ISO13031.

Gripper Cassette

Our tiltrotators can be equipped with gripper cassette and three finger gripper that will make your excavator even more flexible. The gripper cassette can be retrofitted.

Central lubrication

Our tiltrotators can be equipped directly from factory with central lubrication that fit all central lubrication systems in the market. Read more here.


Specifications

Attachment coupler:
S50
Building height (inch):
15.59
Cylinder width (inch):
23
Gripper reach (inch):
20.20
Hydraulic extras with grip:
0
Hydraulic extras without grip:
1
Length (inch):
24.33
Length with gripper (inch):
31.14
Lubrication of the gear housing:
Grease
Maximum tilt angle (degrees):
45
Necessary flow (gallons/min):
8-13
Pressure (bar):
210
Recommended machine weight (lb):
11000-15400
Rotational force (kNm):
5,2
Rotational speed (r/m):
8
Tilt power (kNm):
13,8
Top unit:
S50
Type:
S50/S50
Typee:
S50/S50
Weight from (lb):
429
Weight with gripper from (lb):
583
Width (inch):
14.37
Width with gripper (inch):
22.44

Links

  • Specifications

    Specifications

    Attachment coupler:
    S50
    Building height (inch):
    15.59
    Cylinder width (inch):
    23
    Gripper reach (inch):
    20.20
    Hydraulic extras with grip:
    0
    Hydraulic extras without grip:
    1
    Length (inch):
    24.33
    Length with gripper (inch):
    31.14
    Lubrication of the gear housing:
    Grease
    Maximum tilt angle (degrees):
    45
    Necessary flow (gallons/min):
    8-13
    Pressure (bar):
    210
    Recommended machine weight (lb):
    11000-15400
    Rotational force (kNm):
    5,2
    Rotational speed (r/m):
    8
    Tilt power (kNm):
    13,8
    Top unit:
    S50
    Type:
    S50/S50
    Typee:
    S50/S50
    Weight from (lb):
    429
    Weight with gripper from (lb):
    583
    Width (inch):
    14.37
    Width with gripper (inch):
    22.44
  • Downloads & Documentation

    Links

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Norlift Employee Portal