HC60 (10-22 tonnes)

Steelwrist Powered Work Tools – Compactor
Compaction made easy

Steelwrist Compactors are designed for quiet, safe, comfortable and maintenance free compaction of soil, pipeline trenches, embankments, pits and shafts. The low height and off-center bracket position increase the reach and you can use the compactor under obstacles and in other narrow positions.

The open design allows the compactor plate to self-clean and prevent backfill material to jam the compactor. The angled housing design and rubber buffers provides optimum force distribution for the compaction work and makes it possible to use in rough terrain. The 15° angle also reduce stress on the rubber buffers resulting in less wear. Additionally the job site safety level is improved as the need for personnel directly in the work area is reduced.


Specifications

Article:
605027
Bracket:
S60, S70, SQ60-4, SQ60-5, SQ65, SQ70, SQ70/55, HS10
Compaction Force, kN:
60
Flow requirement:
90-120
Frequency , Hz:
38
Height (inch):
23.43
Hydraulic pressure, rec/max:
150/250
Length (inch):
37.80
Load Area , m2:
0,67
Machine weight (lb):
22000-48400
Weight (lb):
1364
Width (inch):
27.56

Links

  • Specifications

    Specifications

    Article:
    605027
    Bracket:
    S60, S70, SQ60-4, SQ60-5, SQ65, SQ70, SQ70/55, HS10
    Compaction Force, kN:
    60
    Flow requirement:
    90-120
    Frequency , Hz:
    38
    Height (inch):
    23.43
    Hydraulic pressure, rec/max:
    150/250
    Length (inch):
    37.80
    Load Area , m2:
    0,67
    Machine weight (lb):
    22000-48400
    Weight (lb):
    1364
    Width (inch):
    27.56
  • Downloads & Documentation

    Links

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location