GB4 180l (3-5 tonnes)
GB4 180l (3-5 tonnes)
GB4 180l (3-5 tonnes)
GB4 180l (3-5 tonnes)
GB4 180l (3-5 tonnes)
GB4 180l (3-5 tonnes)

Grading bucket optimized for use with tiltrotators

Steelwrist grading bucket is designed for optimal use with our tiltrotators and quick couplers. The grading buckets has relatively low weight, just like our other products, but is still extremely robust thanks to smart materials and thoughtful design. The design with chamfered corners, open angle, long and flat bottom and conical design are some of the properties. This allows the buckets to cut through the material with minimal digging resistance, which affects your fuel efficiency positively.

On the larger buckets (S60 and upwards) oversized pipes are used to increase the stiffness of the buckets, while the sheet metal truss structure used on the smaller buckets to keep the weight down.

The rounded back of the bucket allows the the material releases easier and fill without clogging during digging. Steelwrist planeringskopa is simply a bucket that does grading work easier.


Specifications

Article:
898300
Cutting edge (inch):
0.79
Machine weight (lb):
6600-11000
Quick coupler:
S40
Tiltrotator:
X04, X06
Volume (yd³):
0.24
Weight (lb):
286
Width (inch):
43.31

Links

  • Specifications

    Specifications

    Article:
    898300
    Cutting edge (inch):
    0.79
    Machine weight (lb):
    6600-11000
    Quick coupler:
    S40
    Tiltrotator:
    X04, X06
    Volume (yd³):
    0.24
    Weight (lb):
    286
    Width (inch):
    43.31
  • Downloads & Documentation

    Links

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.