Hydraulic Reversibles
Hydraulic Reversibles
Hydraulic Reversibles
Hydraulic Reversibles

MBW's hydraulic shifting reversible plates solve maintenance problems that have long plagued this product type. MBW exciter systems are vented to prevent damage to shifting mechanism seals. Worn shifting seals are readily serviced from the outside of the exciter assembly (patented), eliminating the complicated process of opening and exposing the exciter assembly for service purposes. Maintenance is simplified, service time is reduced dramatically.

All MBW hydraulic reversibles are easy to maneuver, featuring forward and reverse travel as well as spot compaction. Powered by Honda gas engines, these reversibles have plenty of power to tackle the toughest compaction applications.

MBW advises users to carefully consider which type of compactor best fits the job. If there is sufficient room to maneuver a single direction plate, productivity, cost and maintenance favor the single direction unit. But where maneuverability is key, reversible plates are the answer.


Specs

Model

GPR15-24

GPR15-26

Engine Option

Honda GX390

Honda GX390

Operating Weight

893 lbs

915 lbs

Plate Size WxL

22 x 33 in

26 x 33 in

Centrifugal Force

14792 lbs

14792 lbs

Exciter Speed

4150 vpm

4150 vpm

Compaction Depth

Up to 28 in

Up to 28 in

Travel Speed

Up to 90 ft/min

Up to 87 ft/min

Compaction Area

10800 sq ft/hr

11310 sq ft/hr

Features

  • Only reversible plate line Made in the USA

  • Lifting bails for ease in handling

  • Travel speeds are 15 to 20% faster

  • Solid steel plates with substantially higher abrasion resistance & strength than cast

  • Patented design allows for exchange of lower hydraulic shift seal in approximately 30 minutes versus up to 6 hours in competitive designs

  • Protected by a full wrap around roll cage

  • Infinitely variable travel speed in forward and reverse directions plus spot compaction

  • Increased weight, amplitude and travel speed

  • Powered by GX390 Honda. Diesel option coming soon

  • Lower hand arm vibration along with simple, convenient, safe controls at operator’s position

  • Lower maintenance hydraulic shifting mechanism

  • Easier to shift direction

  • Details

    Specs

    Model

    GPR15-24

    GPR15-26

    Engine Option

    Honda GX390

    Honda GX390

    Operating Weight

    893 lbs

    915 lbs

    Plate Size WxL

    22 x 33 in

    26 x 33 in

    Centrifugal Force

    14792 lbs

    14792 lbs

    Exciter Speed

    4150 vpm

    4150 vpm

    Compaction Depth

    Up to 28 in

    Up to 28 in

    Travel Speed

    Up to 90 ft/min

    Up to 87 ft/min

    Compaction Area

    10800 sq ft/hr

    11310 sq ft/hr

  • Features

    Features

    • Only reversible plate line Made in the USA

    • Lifting bails for ease in handling

    • Travel speeds are 15 to 20% faster

    • Solid steel plates with substantially higher abrasion resistance & strength than cast

    • Patented design allows for exchange of lower hydraulic shift seal in approximately 30 minutes versus up to 6 hours in competitive designs

    • Protected by a full wrap around roll cage

    • Infinitely variable travel speed in forward and reverse directions plus spot compaction

    • Increased weight, amplitude and travel speed

    • Powered by GX390 Honda. Diesel option coming soon

    • Lower hand arm vibration along with simple, convenient, safe controls at operator’s position

    • Lower maintenance hydraulic shifting mechanism

    • Easier to shift direction

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.