TC180/S60 (12-18 tonnes)
TC180/S60 (12-18 tonnes)
TC180/S60 (12-18 tonnes)
TC180/S60 (12-18 tonnes)
TC180/S60 (12-18 tonnes)
TC180/S60 (12-18 tonnes)

When a robust tilt function is enough

The Steelwrist tilt coupler is a combination between a robust tilt motor and the patented Front Pin Lock technology from Steelwrist. With the Steelwrist tilt coupler you will get a safe quick coupler solution when you just need the tilt function and not the full blown tiltrotator functionality.

The Steelwrist tilt coupler is based on the steel casted coupler as well as the robust direct fit top with expander pins.


Specifications

Building height (inch):
19.49
Driving Torque (Nm):
13300
Holding Torque (Nm):
40700
Maximum tilt angle (degrees):
2x60
Oil Flow (gallons/min):
7-21
Pin distance (cc-meassure)(inch):
13-18.11
Pin distance (cc-meassure)(mm):
330-460
Pressure (bar):
210
Quick coupler:
S60
Shaft diameter dipper (inch):
2.36-3.15
Type:
TC180/S60
Weight (lb):
792
Width dipper arm (inch):
10-12

Links

  • Specifications

    Specifications

    Building height (inch):
    19.49
    Driving Torque (Nm):
    13300
    Holding Torque (Nm):
    40700
    Maximum tilt angle (degrees):
    2x60
    Oil Flow (gallons/min):
    7-21
    Pin distance (cc-meassure)(inch):
    13-18.11
    Pin distance (cc-meassure)(mm):
    330-460
    Pressure (bar):
    210
    Quick coupler:
    S60
    Shaft diameter dipper (inch):
    2.36-3.15
    Type:
    TC180/S60
    Weight (lb):
    792
    Width dipper arm (inch):
    10-12
  • Downloads & Documentation

    Links

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.