Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed
Stumpex 2-Speed

The Fecon STUMPEX stump grinder mounts to skid steers and backhoes with as little as 20 gpm hydraulic output. The STUMPEX’s low RPM and 33,600 ft. per lb. of torque enables it to draw itself down into any species of stump. Low maintenance costs, high production, and less clean-up make the STUMPEX excellent for stump grinding contractors in land clearing, tree care, and municipal applications.


Specs

Model

SHX33SX

SHX34EXC

Mount

SS/CTL QA

EXC

Bit Diameter

32"

32"

Weight (LBS)

1368lbs

2000lbs + mount

Flow Required (GPM)

20-42

40-65

Max Pressure (PSI)

4250

5800

Class (Ton)

8-12

12-20

Features

  • Various models mount on excavators with a 8-20 ton rating

  • The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass

  • Mount on skid steers and backhoes with 20-42 GPM / 2,500 to 4,000 psi

  • Larger diameter stumps are processed by making additional passes

  • Universal SSL/CTL quick attach built into the body (SHX33 only)

  • A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge

  • Two speed hydraulic motor

  • Fraction of work time compared to conventional stumpers

  • Low maintenance (greasing and sharpening only)

  • Low RPM auger bit (7-16 RPM) leads to easy clean-up and has no high-speed flying debris for a safer work zone

  • High-torque, low RPM stump grinding bit

  • No carbide tools to replace

  • Details

    Specs

    Model

    SHX33SX

    SHX34EXC

    Mount

    SS/CTL QA

    EXC

    Bit Diameter

    32"

    32"

    Weight (LBS)

    1368lbs

    2000lbs + mount

    Flow Required (GPM)

    20-42

    40-65

    Max Pressure (PSI)

    4250

    5800

    Class (Ton)

    8-12

    12-20

  • Features

    Features

    • Various models mount on excavators with a 8-20 ton rating

    • The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass

    • Mount on skid steers and backhoes with 20-42 GPM / 2,500 to 4,000 psi

    • Larger diameter stumps are processed by making additional passes

    • Universal SSL/CTL quick attach built into the body (SHX33 only)

    • A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge

    • Two speed hydraulic motor

    • Fraction of work time compared to conventional stumpers

    • Low maintenance (greasing and sharpening only)

    • Low RPM auger bit (7-16 RPM) leads to easy clean-up and has no high-speed flying debris for a safer work zone

    • High-torque, low RPM stump grinding bit

    • No carbide tools to replace

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Norlift Employee Portal