D35C-9
D35C-9
D35C-9
D35C-9
D35C-9
D35C-9
D35C-9
D35C-9
D35C-9
D35C-9

D35C-9 — MEDIUM-CAPACITY DIESEL PNEUMATIC TIRE FORKLIFTS

• Medium capacity 4,000-7,000 lb. range

• Powerful 2.4 L D24 diesel engines

• Three performance modes

• Guardian Stability System (GSS)

• Operator Sensing System (OSS)

• Shift ProTek hot-shift transmission protection

OVERVIEW

The most popular diesel forklifts include technology, superior components and extended planned maintenance intervals, keeping operational expenses low.

• Quiet Tier 4 diesel engine

• Three performance modes (ECO/STD/HIGH)

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.


OPERATIONAL ENHANCEMENTS:

OPERATOR SENSING SYSTEM (OSS)

Should the operator leave the seat, the OSS automatically initiates these functions:

• Quickly stops all truck movement

• Locks the lift, lower and tilt functions of mast and hydraulic assemblies

• A seatbelt warning light will alert the operator to re-fasten the seat belt

• The shift selector must be in the neutral position in order to re-start the truck

GUARDIAN STABILITY SYSTEM (GSS)

• Decreases Travel Speed by 50% when traveling with mast raised beyond Primary stage

• Forward Tilt Reduced to 2° when traveling with mast raised beyond Primary stage

• Alarm Sounds when traveling with mast raised beyond Primary stage and Tilt > 2°

• Auto Speed Control Sensors Indicate Sharp Turn and reduces travel speed proportionately

BAR TYPE OVERHEAD GUARD

The precisely designed Overhead Guard (OHG) profile has an optimized bar thickness and arrangement, providing strength and a clear view.

HIGH VISIBILITY MAST

The forklift has hydraulic hoses and mast chains which are strategically placed to enhance forward visibility.

LOW PROFILE DASH

Greatly enhances forward view of load or while travelling.

ELECTRONIC PARKING BRAKE

Automatically applies brakes should operator leave the seat. The release is conveniently located next to the hydraulic control levers. The actual braking mechanism is mounted inside the transmission.

STROBE, ALARM, MIRRORS

A strobe, backup alarm, and side mirrors come standard on all models.

REAR GRAB BAR W/ HORN BUTTON

Allows operator to sound the horn while holding onto the rear grab bar handle and travelling in reverse. Standard on these models.

ORANGE SEAT BELT

Orange seatbelt has a sensor to remind the operator to remain belted at any time the truck is in operation.

PROGRAMMABLE SPEED LIMIT

Easily programmable to match travel speeds (forward and/or reverse) to a particular application or setting.

LOAD-SENSING HYDRAULIC SYSTEM

Provides better overall performance by increasing power while truck is under load.

3-POINT ENTRY/EXIT SYSTEM

A hand rail along mast, the seat armrest, and large anti-slip step plate enhanced entry and exit.

ADVANCED ERGONOMICS:

LOW EFFORT FOOT PEDAL

Reduces operator effort by as much as 70% when depressing the pedal.

LOW EFFORT FOOT PEDAL

Reduces operator effort by as much as 70% when depressing the pedal.

TELESCOPIC AND TILTING STEERING COLUMN

The steering column is adjustable to meet varying operator sizes.

SPACIOUS HEAD AND LEGROOM

Enhanced comfort for operators of different sizes.

• Operator legroom is increased by over 30% compared to previous series

RECESSED TILT CYLINDERS

The tilt cylinders are completely recessed under the floorplate for increased floorspace and easier entry & exit.

HIGH COMFORT SEAT

The seat is wide and comfortable. It is fully adjustable to fit a variety of sizes.

FULL-COLOR LCD DISPLAY

The 5 in. or 7 in. LCD monitor is bright and clear, providing good visibility outdoors to quickly and easily check truck conditions.

OPERATOR CONVENIENCE PACKAGE

Provides excellent storage for paperwork, refreshments, small tools, etc.

THICK RUBBER FLOOR MAT

Thick, fitted rubber floor mat reduces heat & noise.

EASY ENTRY & EXIT

3-Point entry and exit features make getting onto or off of the vehicle much less strenuous.

SIMPLIFIED SERVICEABILITY:

FEWER SCHEDULED SERVICE INTERVALS

Fewer scheduled maintenances save you time and money.

• Engine oil change interval is every 1,000 hours. (was 500 hrs.)

• Transmission oil change interval is once every 2,000 hrs. (was 1,000 hrs.)

• Drive axle oil change interval is now every 1,000 hrs. (was 500 hrs.)

WELL-POSITIONED MAINTENANCE COMPONENTS

• All fuse and relay access is centralized and easy to access

QUICK ACCESS TO KEY ELEMENTS

• Battery

• Air filter

• Oil filter

• Dipstick and fluid level indicators

BRIGHT & INFORMATIVE LED DISPLAY

Large, bright, and intuitive display provides truck health status quickly and easily.

TOOL-FREE ACCESS PANELS

The floor plate and side panels are easily detached without tools, making inspections much faster.

AUTO-MAINTENANCE NOTIFICATIONS

Important maintenance details such as truck service codes and consumable replacement cycles are communicated via the display.

EASY-TO-READ DIAGNOSTICS

The technician can easily diagnose truck conditions using only a cable and laptop.

WIDE OPENING ENGINE COVER

Improves access to engine and maintenance components for Inspection or maintenance.

EASY ACCESS TO MAINTENANCE POINTS

Makes maintenance and inspections quick and simple, so you can get back to doing more.

DUAL ELEMENT AIR CLEANER

This feature offers added protection to the engine's air intake, which extends engine life and reduces maintenance costs.

ONBOARD DIAGNOSTICS

OBD allows you to diagnose the vehicle as well as to set its performance parameters via a laptop (no special tools required).

ENHANCED PRODUCTIVITY:

REFINED OPERATOR COMPARTMENT

The refined operator space is designed for comfort. With optimized pedal positions, the roomy operator compartment has an adjustable steering column and seat, allowing operators to easily find their optimum driving position.

INTUITIVE INSTRUMENT PANEL

A high-visibility and well-placed instrument panel offers icons that keep the operator informed about the truck's operational conditions.

SHIFT PROTEK HOT SHIFT PROTECTION

Shift ProTek limits directional changes to under 5 mph, allowing for shift-on-the-fly and making quick shuttle applications a breeze. The market-proven Shift ProTek transmission precisely modulates clutch oil pressure for smooth forward and reverse directional changes. Shift on the go without damage to the transmission.

ENHANCED COOLING SYSTEM

Our standard cooling system is equivalent to others' heavy duty cooling systems which cost you thousands more.

INCHING PEDAL

The inching pedal provides slow speed control of truck movement while in tight confines, without affecting lifting speed.

LOWER COST OF OWNERSHIP:

FEWER SCHEDULED SERVICE INTERVALS

Fewer scheduled maintenances save you time and money.

• Engine oil change interval is every 1,000 hours. (was 500 hrs.)

• Transmission oil change interval is once every 2,000 hrs. (was 1,000 hrs.)

• Drive axle oil change interval is now every 1,000 hrs. (was 500 hrs.)

ECO MODE

These fuel-efficient engines allow the user to choose from either Standard Mode or Eco Mode. Eco Mode saves on fuel costs.

DURABLE RELIABILITY:

INDUSTRY PROVEN LP ENGINES

Our LP engines provide excellent power, performance, fuel economy, low noise, and low vibration along with superior durability.

OIL COOLED DISC BRAKES

This 'Best-in-Class’ brake system comes with a 5-Year or 10,000 working hour warranty:

• Discs are submerged in oil, keeping them cool and limiting wear

• 100% of friction material is used for superior stopping power

• OCDB are more easily serviced in the field than traditional brakes

• System is sealed for maximum protection against contamination

ROBUST HYDROSTATIC STEER AXLE

• No mechanical connections between the steering wheel & steer axle

• Fewer moving parts mean fewer things that could fail, assuring maximum run-time.

• Low-effort steering for operator comfort and reduced fatigue

• Quick steering response for increased maneuverability

• Grease fittings on kingpin and steer linkage for easy maintenance

• Shock-absorbing steer axle bushings extend the service life of the unit

SUPERIOR COMPONENTS VS. COMPETITIVE MODELS

The steer axle assembly is built with durable components which enhance product life and reduce maintenance costs.

• Larger diameter kingpins and tapered roller bearings for a stronger axle

• Tapered rollers are stronger against side impact forces

• Tapered roller bearings have an inner race to eliminate wear on the kingpin

IP RATED WATER-RESISTANT ELECTRICAL CONNECTIONS

The use of IP (Ingress Protection) rated connectors protects the electrical components from ingress of moisture and debris, assuring you that your truck will be ready to work in various climates and weather conditions.

HIGH CAPACITY AIR CLEANER

Additional capacity of air cleaner extends engine life and reduces maintenance costs.

Specifications

Dimensions - Free Lift:
6 in
Dimensions - Ground Clearance Loaded:
4.1 IN
Dimensions - Height - Mast Lowered:
85.8 in
Dimensions - Length:
150.7 in
Dimensions - Load Management Center:
19.5 in
Dimensions - Overhead Guard Height:
85.9 in
Dimensions - Wheelbase:
66.9 in
Electrical System - :
Electrical System - Rated Power:
46.23 kW
Engine - Engine Fuel:
Diesel
Engine - Engine Model:
DI/DM02P
Engine - Max Torque:
Key Specifications - Max Load Capacity lb (kg):
7,000 lb
Performance - Lift Speed - Loaded:
99.5 ft/min
Performance - Lift Speed - Unloaded:
109.2 ft/min
Performance - Load Center:
24 in
Performance - Machine Rated Capacity:
7,000 lb
Performance - Max Load Capacity:
7,000 lb
Performance - Travel Speed - Loaded:
12.5mph
Performance - Travel Speed - Unloaded:
13 mph
  • Details

    OPERATIONAL ENHANCEMENTS:

    OPERATOR SENSING SYSTEM (OSS)

    Should the operator leave the seat, the OSS automatically initiates these functions:

    • Quickly stops all truck movement

    • Locks the lift, lower and tilt functions of mast and hydraulic assemblies

    • A seatbelt warning light will alert the operator to re-fasten the seat belt

    • The shift selector must be in the neutral position in order to re-start the truck

    GUARDIAN STABILITY SYSTEM (GSS)

    • Decreases Travel Speed by 50% when traveling with mast raised beyond Primary stage

    • Forward Tilt Reduced to 2° when traveling with mast raised beyond Primary stage

    • Alarm Sounds when traveling with mast raised beyond Primary stage and Tilt > 2°

    • Auto Speed Control Sensors Indicate Sharp Turn and reduces travel speed proportionately

    BAR TYPE OVERHEAD GUARD

    The precisely designed Overhead Guard (OHG) profile has an optimized bar thickness and arrangement, providing strength and a clear view.

    HIGH VISIBILITY MAST

    The forklift has hydraulic hoses and mast chains which are strategically placed to enhance forward visibility.

    LOW PROFILE DASH

    Greatly enhances forward view of load or while travelling.

    ELECTRONIC PARKING BRAKE

    Automatically applies brakes should operator leave the seat. The release is conveniently located next to the hydraulic control levers. The actual braking mechanism is mounted inside the transmission.

    STROBE, ALARM, MIRRORS

    A strobe, backup alarm, and side mirrors come standard on all models.

    REAR GRAB BAR W/ HORN BUTTON

    Allows operator to sound the horn while holding onto the rear grab bar handle and travelling in reverse. Standard on these models.

    ORANGE SEAT BELT

    Orange seatbelt has a sensor to remind the operator to remain belted at any time the truck is in operation.

    PROGRAMMABLE SPEED LIMIT

    Easily programmable to match travel speeds (forward and/or reverse) to a particular application or setting.

    LOAD-SENSING HYDRAULIC SYSTEM

    Provides better overall performance by increasing power while truck is under load.

    3-POINT ENTRY/EXIT SYSTEM

    A hand rail along mast, the seat armrest, and large anti-slip step plate enhanced entry and exit.

    ADVANCED ERGONOMICS:

    LOW EFFORT FOOT PEDAL

    Reduces operator effort by as much as 70% when depressing the pedal.

    LOW EFFORT FOOT PEDAL

    Reduces operator effort by as much as 70% when depressing the pedal.

    TELESCOPIC AND TILTING STEERING COLUMN

    The steering column is adjustable to meet varying operator sizes.

    SPACIOUS HEAD AND LEGROOM

    Enhanced comfort for operators of different sizes.

    • Operator legroom is increased by over 30% compared to previous series

    RECESSED TILT CYLINDERS

    The tilt cylinders are completely recessed under the floorplate for increased floorspace and easier entry & exit.

    HIGH COMFORT SEAT

    The seat is wide and comfortable. It is fully adjustable to fit a variety of sizes.

    FULL-COLOR LCD DISPLAY

    The 5 in. or 7 in. LCD monitor is bright and clear, providing good visibility outdoors to quickly and easily check truck conditions.

    OPERATOR CONVENIENCE PACKAGE

    Provides excellent storage for paperwork, refreshments, small tools, etc.

    THICK RUBBER FLOOR MAT

    Thick, fitted rubber floor mat reduces heat & noise.

    EASY ENTRY & EXIT

    3-Point entry and exit features make getting onto or off of the vehicle much less strenuous.

    SIMPLIFIED SERVICEABILITY:

    FEWER SCHEDULED SERVICE INTERVALS

    Fewer scheduled maintenances save you time and money.

    • Engine oil change interval is every 1,000 hours. (was 500 hrs.)

    • Transmission oil change interval is once every 2,000 hrs. (was 1,000 hrs.)

    • Drive axle oil change interval is now every 1,000 hrs. (was 500 hrs.)

    WELL-POSITIONED MAINTENANCE COMPONENTS

    • All fuse and relay access is centralized and easy to access

    QUICK ACCESS TO KEY ELEMENTS

    • Battery

    • Air filter

    • Oil filter

    • Dipstick and fluid level indicators

    BRIGHT & INFORMATIVE LED DISPLAY

    Large, bright, and intuitive display provides truck health status quickly and easily.

    TOOL-FREE ACCESS PANELS

    The floor plate and side panels are easily detached without tools, making inspections much faster.

    AUTO-MAINTENANCE NOTIFICATIONS

    Important maintenance details such as truck service codes and consumable replacement cycles are communicated via the display.

    EASY-TO-READ DIAGNOSTICS

    The technician can easily diagnose truck conditions using only a cable and laptop.

    WIDE OPENING ENGINE COVER

    Improves access to engine and maintenance components for Inspection or maintenance.

    EASY ACCESS TO MAINTENANCE POINTS

    Makes maintenance and inspections quick and simple, so you can get back to doing more.

    DUAL ELEMENT AIR CLEANER

    This feature offers added protection to the engine's air intake, which extends engine life and reduces maintenance costs.

    ONBOARD DIAGNOSTICS

    OBD allows you to diagnose the vehicle as well as to set its performance parameters via a laptop (no special tools required).

    ENHANCED PRODUCTIVITY:

    REFINED OPERATOR COMPARTMENT

    The refined operator space is designed for comfort. With optimized pedal positions, the roomy operator compartment has an adjustable steering column and seat, allowing operators to easily find their optimum driving position.

    INTUITIVE INSTRUMENT PANEL

    A high-visibility and well-placed instrument panel offers icons that keep the operator informed about the truck's operational conditions.

    SHIFT PROTEK HOT SHIFT PROTECTION

    Shift ProTek limits directional changes to under 5 mph, allowing for shift-on-the-fly and making quick shuttle applications a breeze. The market-proven Shift ProTek transmission precisely modulates clutch oil pressure for smooth forward and reverse directional changes. Shift on the go without damage to the transmission.

    ENHANCED COOLING SYSTEM

    Our standard cooling system is equivalent to others' heavy duty cooling systems which cost you thousands more.

    INCHING PEDAL

    The inching pedal provides slow speed control of truck movement while in tight confines, without affecting lifting speed.

    LOWER COST OF OWNERSHIP:

    FEWER SCHEDULED SERVICE INTERVALS

    Fewer scheduled maintenances save you time and money.

    • Engine oil change interval is every 1,000 hours. (was 500 hrs.)

    • Transmission oil change interval is once every 2,000 hrs. (was 1,000 hrs.)

    • Drive axle oil change interval is now every 1,000 hrs. (was 500 hrs.)

    ECO MODE

    These fuel-efficient engines allow the user to choose from either Standard Mode or Eco Mode. Eco Mode saves on fuel costs.

    DURABLE RELIABILITY:

    INDUSTRY PROVEN LP ENGINES

    Our LP engines provide excellent power, performance, fuel economy, low noise, and low vibration along with superior durability.

    OIL COOLED DISC BRAKES

    This 'Best-in-Class’ brake system comes with a 5-Year or 10,000 working hour warranty:

    • Discs are submerged in oil, keeping them cool and limiting wear

    • 100% of friction material is used for superior stopping power

    • OCDB are more easily serviced in the field than traditional brakes

    • System is sealed for maximum protection against contamination

    ROBUST HYDROSTATIC STEER AXLE

    • No mechanical connections between the steering wheel & steer axle

    • Fewer moving parts mean fewer things that could fail, assuring maximum run-time.

    • Low-effort steering for operator comfort and reduced fatigue

    • Quick steering response for increased maneuverability

    • Grease fittings on kingpin and steer linkage for easy maintenance

    • Shock-absorbing steer axle bushings extend the service life of the unit

    SUPERIOR COMPONENTS VS. COMPETITIVE MODELS

    The steer axle assembly is built with durable components which enhance product life and reduce maintenance costs.

    • Larger diameter kingpins and tapered roller bearings for a stronger axle

    • Tapered rollers are stronger against side impact forces

    • Tapered roller bearings have an inner race to eliminate wear on the kingpin

    IP RATED WATER-RESISTANT ELECTRICAL CONNECTIONS

    The use of IP (Ingress Protection) rated connectors protects the electrical components from ingress of moisture and debris, assuring you that your truck will be ready to work in various climates and weather conditions.

    HIGH CAPACITY AIR CLEANER

    Additional capacity of air cleaner extends engine life and reduces maintenance costs.

  • Specifications

    Specifications

    Dimensions - Free Lift:
    6 in
    Dimensions - Ground Clearance Loaded:
    4.1 IN
    Dimensions - Height - Mast Lowered:
    85.8 in
    Dimensions - Length:
    150.7 in
    Dimensions - Load Management Center:
    19.5 in
    Dimensions - Overhead Guard Height:
    85.9 in
    Dimensions - Wheelbase:
    66.9 in
    Electrical System - :
    Electrical System - Rated Power:
    46.23 kW
    Engine - Engine Fuel:
    Diesel
    Engine - Engine Model:
    DI/DM02P
    Engine - Max Torque:
    Key Specifications - Max Load Capacity lb (kg):
    7,000 lb
    Performance - Lift Speed - Loaded:
    99.5 ft/min
    Performance - Lift Speed - Unloaded:
    109.2 ft/min
    Performance - Load Center:
    24 in
    Performance - Machine Rated Capacity:
    7,000 lb
    Performance - Max Load Capacity:
    7,000 lb
    Performance - Travel Speed - Loaded:
    12.5mph
    Performance - Travel Speed - Unloaded:
    13 mph

Contact

Contact

Consignment

Request a Service

×

Norlift Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Norlift Employee Portal