Toyota 3-Wheel Electric (3,000-4,000 LBS)
|
Quick Look
|
Electrical System:
|
36 / 48 V Electrical System |
Length to Forkface:
|
69 - 77.2 in |
Load Capacity:
|
3,000 - 4,000 LB. Load Capacity |
Overall Width:
|
41.5 in |
|
HANGCHA 3-Wheel Electric Forklift (3,000-4,000 LBS)
|
Quick Look
|
SAFETY |
This forklift was designed to meet both the ANSI and ITSDF safety standards. This means that the following all come standard on this forklift:
1. An emergency cut off switch.
2. An overloading protection system is integrated into the electronics and hydraulic systems.
3. The controller automatically reduces the forklift’s speed while cornering. |
MANEUVERABILITY | With dual separate driving motors, this forklift can move the front wheels forward or backward independently. This, combined with the 3-wheel design, allows for the forklift to have a small turning radius suitable for narrow applications. The high-performance AC driving motors deliver reliable power to keep the user moving quickly throughout their facility. The imported reducer and high-power driving motors provide reliable and strong performance.
|
APPEARANCE | The A Series 3-Wheel Electric Forklift is designed to stack and retrieve goods efficiently in narrow aisles and at high lift heights while still maintaining a lifting capacity of up to 4,000lbs. The exterior of this forklift is powder coated in a durable, easy to see, red finish.
|
STANDARD FEATURES |
• Highly Efficient Dual Front AC Driving Motors
• Multi-Function Instrument Display
• Rubber Floor Mat
• Smooth Cushion Tires
• Emergency Cut Off Switch
• LED Headlights
• Rear Combination LED Light
• Panoramic Rearview Mirror
• 118.1″ Limited Free Lift 2 Stage Mast
• Adjustable Steering Column
• Fully Electronic Controlled Travelling, Lifting, and Steering
• Horn and Reverse Alarm
• CANBUS System
• Low Noise Gear Pump
• Fully Hydraulic Steering
• Soft Landing System
• Non Suspension Seat
• ZF Reducer
• SCHABMULLER Traveling Motor
• CURTIS Controller |
|
HANGCHA 3-Wheel Stand-Up Lift Truck (3,000-5,000 LBS)
|
Quick Look
|
STANDARD FEATURES |
• AC Dual Drive Motors
• AC Pump Motor
• Multiple Operation Modes
• EPS System
• Regenerative Braking
• Electronic Parking Brake
• Cornering Speed Control
• OPS System
• Shock-Absorption Pedal
• Waist and Elbow Support Cushions
• Multi-Functional Integrated Instrument Cluster
• Smooth Cushion Tires
• Emergency Cut-Off Switch
• Integrated Operating Handle
• Quadruple and Multi-Way Valve
• Quadruple and Multi-Way Valve
• 117” Limited Free Lift 2 Stage Mast
• Electric Horn
• Cup Holder and Clipboard
• Low Noise Gear Pump
• 36V BS Standard Battery
• Soft Landing System
• Battery Side Extraction |
HIGH PERFORMANCE |
• Thanks to the advanced front dual-drive AC motor, the traveling performance, maneuverability, and operating efficiency are greatly improved.
• Hangcha’s AC hydraulic system provides smooth load handling and precise load placements.
• The electronic proportional multi-way valve reduces energy consumption.
• Electric Power Steering provides precise steering control with minimal effort. It also does not encroach into the operator compartment.
|
APPEARANCE | The A Series 3-Wheel Stand-Up Counterbalanced Lift Truck is designed to stack and retrieve goods efficiently in narrow aisles and at high lift heights while still maintaining a lifting capacity of up to 5,000lbs. The exterior of this forklift is powder coated in a durable, easy to see, red finish. |
SAFETY |
• Cornering speed control automatically slows the forklift’s travel speed while turning to help prevent damage to loads.
• Operation is easy thanks to the foot-raising brake pedal.
• The electronic parking brake greatly improves the safety of the truck and the operator.
• With the pedal sensing system, the truck can be driven only if the operator stands on the pedal. If the operator takes their foot off the pedal, active braking is initiated to prevent an accident. |
|
Toyota 48V Electric Pneumatic Forklift (3,000-4,000 LBS)
|
Quick Look
|
Length to Forkface:
|
79.3-83.5 in. |
Load Capacity:
|
3,000 - 4,000 lb. Load Capacity |
Overall Width:
|
41.7-45.4 |
Overhead Guard Height:
|
80.9 in. |
|
Toyota 80V Electric Pneumatic Forklift (4,000-17,500 LBS)
|
Quick Look
|
Length to Forkface:
|
89.8-143.7 in. |
Load Capacity:
|
5,000 - 17,500 lb. Load Capacity |
Overall Width:
|
47-84.3 in |
Overhead Guard Height:
|
87.2-111.6 in |
|
Bobcat B15SU-9
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
36.4 in |
Technical Data - Height - Mast Lowered:
|
83.7 in |
Technical Data - Length:
|
107.3 in |
|
Bobcat B15T-7 PLUS
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
5.1 in |
Technical Data - Height - Mast Lowered:
|
78.7 in |
Technical Data - Length:
|
115.7 in |
|
Bobcat B16X-7 PLUS
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
5.1 in |
Technical Data - Height - Mast Lowered:
|
84.6 in |
Technical Data - Length:
|
124.7 in |
|
Bobcat B18SU-9
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
36.4 in |
Technical Data - Height - Mast Lowered:
|
83.7 in |
Technical Data - Length:
|
109 in |
|
Bobcat B18T-7 PLUS
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
5.1 in |
Technical Data - Height - Mast Lowered:
|
78.7 in |
Technical Data - Length:
|
119.7 in |
|
Bobcat B18X-7
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
5.3 in |
Technical Data - Height - Mast Lowered:
|
84.6 in |
Technical Data - Length:
|
124.7 in |
|
Bobcat B20SU-9
|
Quick Look
|
Technical Data - Dimensions:
|
|
Technical Data - Free Lift:
|
36.4 in |
Technical Data - Height - Mast Lowered:
|
83.7 in |
Technical Data - Length:
|
111.5 in |
|