Bobcat G45S-7
|
Quick Look
|
Dimensions - Free Lift:
|
6.3 in |
Dimensions - Ground Clearance Loaded:
|
6.3 IN |
Dimensions - Height - Mast Lowered:
|
88 in |
Dimensions - Length:
|
176.4 in |
|
Bobcat G50C-7
|
Quick Look
|
Dimensions - Free Lift:
|
6.7 in |
Dimensions - Ground Clearance Loaded:
|
6.3 IN |
Dimensions - Height - Mast Lowered:
|
94 in |
Dimensions - Length:
|
178.2 in |
|
Bobcat G55C-7
|
Quick Look
|
Dimensions - Free Lift:
|
6.7 in |
Dimensions - Ground Clearance Loaded:
|
6.3 IN |
Dimensions - Height - Mast Lowered:
|
94 in |
Dimensions - Length:
|
179.1 in |
|
Bobcat G60S-7
|
Quick Look
|
Dimensions - Free Lift:
|
8.1 in |
Dimensions - Ground Clearance Loaded:
|
6.9 IN |
Dimensions - Height - Mast Lowered:
|
98.4 in |
Dimensions - Length:
|
189.6 in |
|
HANGCHA IC Compact Pneumatic Forklift (5,000 LBS)
|
Quick Look
|
RELIABILITY |
New Integrated Fuse Box - The next generation of integrated fuse box has been added to the truck. It offers a better layout, ease of service and maintenance, and is waterproof. The entire truck is equipped with waterproof connectors to increase the electronics’ reliability.
Reliable Hydraulic System - The hydraulic system has a longer service life and an increase in efficiency thanks to the optimized hydraulic breather structure with a built-in return oil filter and the load-sensing hydraulic steering system.
Optimized Cooling System - The cooling system has been designed to maximize cooling and increase the reliability of the engine when working under heavy loads. This system uses an aluminum radiator, an independent oil cooler, an optimized heat transfer channel, and a dual-hole counterweight to increase cooling efficiency.
Steering Axle - The steering axle uses large conical bearings on the master pin, buffer blocks, and a large-diameter steering cylinder to substantially increase the reliability and service life of the steering system.
Tilt-Back LP Bracket - The tilt-back cylinder holder makes replacing the LPG cylinder and opening the maintenance hatch for service easy. |
ENVIRONMENTALLY EFFICIENT | North American EPA Certified Engine - The GCT GK25 engine is in compliance with the EPA/CARB Tier 2 emissions standards. Although it meets these standards, the engine still has the power and torque to get the job done. This engine is also electronically controlled to increase the fuel economy and the reliability of the trucks.
LED Light System - LED lights are used throughout the entire truck. The lights are energy-efficient, have a longer service life, and offer a significant increase in performance.
Environmentally-Friendly Materials - Environmentally-friendly materials are also used throughout the truck to minimize environmental damage and impact. |
COMFORT |
Ergonomic Design - The small diameter, adjustable steering wheel, electro-hydraulic steering, and the combination switch increase the ease of operation and operator comfort substantially.
Wide View Mast - The mast has been redesigned to include new types of steel channels and a new mast system. This was done to increase forward visibility for the operator.
Large LCD Instrument Panel - The instrument display is made up of a 4″ color LCD screen with four interactive buttons and one CAN bus communication function. The communication protocol is compatible with CANopen and SAE J1939 standards.
Panoramic Rearview Mirror - The panoramic rearview mirror allows the operator to have wider rear visibility when operating the forklift.
Large Handgrip - The large handgrip on the overhead guard is designed to allow the operator to get in and out of the truck safer and easier. |
SAFETY |
High-Strength Overhead Guard - The overhead guard is fabricated with specially shaped steel tubes to increase its structural rigidity and strength. It is also designed to be easily disassembled and reassembled for repairs. The guard features a flexible connection between it and the chassis to decrease vibrations. All of these features are responsible for increased operator safety and comfort.
Maintenance Hatch with a Safety Latch - The maintenance hatch opens wide enough to provide easy serviceability of key components. The safety latch prevents the hatch from compromising operator safety when using the truck. |
|
Doosan IC Pneumatic (3,000-4,000 LBS)
|
Quick Look
|
|
Doosan IC Pneumatic (4,000-7,000 LBS)
|
Quick Look
|
|
HANGCHA IC Pneumatic Forklift (3,000-7,000 LBS)
|
Quick Look
|
RELIABILITY | By focusing on enhancing reliability and reducing downtime, the XF series is able to increase productivity for its end-users. |
Ergonomic Operator Compartment |
1. The new automobile-style light/turn-signal stalk and the forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity.
2. The small-diameter steering wheel, with tilt adjustment, provides an optimal driving position for the operator. The superior responsiveness of the steering wheel optimizes maneuverability even in narrow spaces.3. The parking brake was developed to reduce the operational force by 30%.
4. The automobile-style suspended pedals provide a more ergonomic, operator centered experience.
5. Optimal visibility in all directions creates the best conditions for relaxed and safe operation. The front lifting cylinders were redesigned with a smaller outer diameter to give the operator superior forward visibility. The double lifting cylinders also provide better forward visibility.
6. The foot space is now 90% wider to significantly reduce operator fatigue. The new wide, non-slip step makes getting in and out of the forklift safe and easy.
7. The easy-to-operate levers provide total load handling operation. The armrest is provided to reduce fatigue. The optional electro-hydraulic proportional control system gives the forklift the ability to make load handling more sensitive and precise. |
Easy-to-See Display | The new relocated, easy-to-see LCD instrument display lets the operator check on all aspects of operational status with a glance. The instrument display consists of a 4″ color LCD screen, four interactive buttons, and one CAN bus communication function. The communication protocol is compatible with CANopen and SAE J1939 standards. |
SAFETY |
A wide range of technology is applied to ensure absolute safety for both the operator and those in the vicinity.
Operator Presence Sensing System - The operator presence sensing (OPS) system incorporates a lifting, tilting, and traveling stop function. When the operator leaves the seat, the system automatically locks the lifting/tilting functions and disables the forklift from traveling to ensure safety.
Mast Safety Device - The throttling device locks the mast in place if there is a hydraulic failure. This adds to the operational safety of the truck.
Soft Lifting/Landing System - In addition to the soft landing system, the soft lifting system is adopted (front lifting cylinders of the full free-lift stage 2 & 3 masts). As a result, the noise and shock of the mast significantly decrease when lifting material.
Locking Mechanisms - There is a locking mechanism found on the engine hood, damper, and parking brake for the operator’s safety.
Optional Rear Reverse Grip- An optional rear reverse grip with a horn button enhances operational safety while traveling in reverse. |
|
Toyota Large IC Pneumatic (13,500-17,500 LBS)
|
Quick Look
|
Fuel Type:
|
Gas / LPG / Diesel Fuel Type |
Length to Forkface:
|
137.4 - 141.3 in |
Load Capacity:
|
13,500 - 17,500 lb. Load Capacity |
Overall Width:
|
77.4 in |
|
Toyota Mid IC Pneumatic (8,000-11,000 LBS)
|
Quick Look
|
Fuel Type:
|
Gas / LPG / Diesel Fuel Type |
Length to forkface:
|
115.2 - 124.8 in |
Load Capacity:
|
8,000 - 11,000 lb. Load Capacity |
Overall Width:
|
53.1 - 57.1 in |
|
HANGCHA Mid Pneumatic Forklift (8,000-11,000 LBS)
|
Quick Look
|
ENVIRONMENTAL FRIENDLINESS |
• Hangcha offers these forklifts with either an LPG or Diesel engine. These powerful engines are respectively built to EPA standards and Tier 4F standards. The engines release fewer emissions and create a cleaner work environment.
• The diesel version uses a CUMMINS engine QSF2.8T4F that complies with Tier 4 Final control regulation. The DOC exhaust treatment found on the CUMMINS engine ensures the exhaust satisfy with USA T4F standards. It also provides a reduction in noise There is also minimal maintenance required when operating the CUMMINS engine. |
SAFETY |
• A wide range of technology is applied to ensure absolute safety for both the operator and those in the vicinity.
• The Operator Presence Sensing (OPS) System incorporates a lifting, tilting, and traveling stop function. When the operator leaves the seat, the system automatically locks the lifting/tilting functions and disables the forklift from traveling to ensure safety.
• An optional rear grip with a horn button enhances operational safety while traveling in reverse.
• There is a locking mechanism found on the engine hood, damper, and parking brake for the operator’s safety.
• The throttling device locks the mast in place if there is a hydraulic failure. This adds to the operational safety of the truck. |
EASY TO MAINTAIN |
• The XF Series is designed to facilitate easy inspections and servicing. Easy maintenance reduces the amount of downtime & cost of ownership.
• The new controller is integrated into all of the electrical components. It also features excellent durability in harsh temperatures, water, and vibrations. This promotes reliability in the most demanding operations.
• The cover on the dash can be lifted to easily check the brake fluid. The two-piece design makes the floorboard easy to lift and remove for access to the powertrain.
• The easy-to-operate latch provides quick access to the engine compartment.
• The radiator cover fasteners can be turned by hand easily to enable quick inspections or servicing. |
COMFORTABLE OPERATION |
• In developing the XF Series, comfort and ease of operation were carefully considered. For example, vibration levels were improved by adding compound engine dampers and full-floating powertrain mounts. Comfortable operating environments for operators also contribute to increased productivity.
• The rubber damper between the frame and the steering axle, the compound engine damper, and the full floating powertrain achieve a flexible connection between the frame and the driving system. As a result, vibrations are significantly reduced to increase operator comfort.
• The increased capacity exhaust muffler, intake, and noise shield technology significantly lower the forklift’s noise levels.
• The new relocated, easy-to-see LCD insturment display lets the operator check on all aspects of operational status with a glance.
• The new automobile-style light/turn-signal stalk and the forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity.
• Optimal visibility in all directions creates the best conditions for relaxed and safe working. These conditions promote high productivity among the operators.
• The small diameter steering wheel, with tilt adjustment, provides an optimal driving position for the operator. The superior responsiveness of the steering wheel optimizes maneuverability even in narrow spaces.
• The parking brake was developed to reduce the operational force by 30%.
• The automobile-style suspended pedals provide a more ergonomic, operator-centered experience.
• The foot space is now 90% wider to significantly reduce operator fatigue. The new wide, non-slip step makes getting in and out of the forklift safe and easy.
• The easy-to-operate levers provide total load handling operation. The armrest is provided to reduce fatigue. The optional electro-hydraulic proportional control system gives the forklift the ability to make load handling more sensitive and precise.
• In addition to the soft landing system, the soft lifting system is adopted (front lifting cylinders of the full free-lift stage 2 & 3 masts). As a result, the noise and shock of the mast significantly decrease when lowering materials.
• The front lifting cylinders were redesigned with a smaller outer diameter to give the operator superior forward visibility. The double lifting cylinders also provide better forward visibility. |
|