HANGCHA Big Pneumatic Forklift (11,000-15,500 LBS)
|
Quick Look
|
OPERATOR COMFORT |
• While developing the XF Series, comfort and ease of operation were carefully considered. The engineers decreased vibration levels by using a compound engine damper and full-floating seat and cabin. The forklift was made more comfortable because a comfortable operator leads to increased operational productivity.
• The foot space is now 30% wider to significantly reduce operator fatigue. The new wide, non-slip step makes getting in and out of the forklift safe and easy.
• The easy-to-operate levers provide total load handling operation. The armrest is provided to reduce fatigue. The optional electro-hydraulic proportional control system gives the forklift the ability to make load handling more sensitive and precise.
• In addition to the soft landing system, the soft lifting system is adopted (front lifting cylinders of the full free lift 2 & 3 stage masts). As a result, the noise and shock of the mast significantly decrease when lowering materials.
• The mast was redesigned to provide broad forward visibility. This was done by increasing the distance between the inside of the mast by 2.34″ |
EASY TO MAINTAIN |
• Designed for easy inspection and servicing. The XF Series’ quick and easy maintenance reduces downtime and operational costs.
• The location of the air filter allows for easy reach and replacement when the filter needs to be changed.
• The engine oil level dipstick, hydraulic filter, and water separator are easy to reach and allow for easy maintenance.
• The gas spring support for the front cover of the radiator auto-opens when the rear cover of the radiator is opened. |
SAFETY |
• A wide range of technology is applied to ensure absolute safety for both the operator and those in the vicinity.
• There’s an energy accumulator in the braking system. This allows for the brakes to continue to function after the engine is shut off.
• There is a locking mechanism found on the engine hood, damper, and parking brake for the operator’s safety.
• The Operator Presence Sensing System (OPS) incorporates a lifting, tilting, and traveling stop function. When the operator leaves the seat, the system automatically locks the lifting/tilting functions and disables the forklift from traveling to ensure safety.
• The throttling device locks the mast in place if there is a hydraulic failure. This adds to the operational saftey of the truck. |
PRODUCTIVITY |
• Thanks to a series of technological innovations, the efficiency of the truck is improved and the energy consumption is reduced.
• By optimizing the transmission design, the maximum driving speed is increased by 20%
• The new efficient lighting system uses LEDs and a new type of reflector to reduce energy consumption. This significantly improves illumination performance while also prolonging operation time.
• The new dynamic load sensing hydraulic steering system requires 10% less hydraulic oil while providing a 15% increase in lifting speed. |
|
HANGCHA IC Compact Pneumatic Forklift (5,000 LBS)
|
Quick Look
|
ENVIRONMENTALLY EFFICIENT | North American EPA Certified Engine - The GCT GK25 engine is in compliance with the EPA/CARB Tier 2 emissions standards. Although it meets these standards, the engine still has the power and torque to get the job done. This engine is also electronically controlled to increase the fuel economy and the reliability of the trucks.
LED Light System - LED lights are used throughout the entire truck. The lights are energy-efficient, have a longer service life, and offer a significant increase in performance.
Environmentally-Friendly Materials - Environmentally-friendly materials are also used throughout the truck to minimize environmental damage and impact. |
COMFORT |
Ergonomic Design - The small diameter, adjustable steering wheel, electro-hydraulic steering, and the combination switch increase the ease of operation and operator comfort substantially.
Wide View Mast - The mast has been redesigned to include new types of steel channels and a new mast system. This was done to increase forward visibility for the operator.
Large LCD Instrument Panel - The instrument display is made up of a 4″ color LCD screen with four interactive buttons and one CAN bus communication function. The communication protocol is compatible with CANopen and SAE J1939 standards.
Panoramic Rearview Mirror - The panoramic rearview mirror allows the operator to have wider rear visibility when operating the forklift.
Large Handgrip - The large handgrip on the overhead guard is designed to allow the operator to get in and out of the truck safer and easier. |
SAFETY |
High-Strength Overhead Guard - The overhead guard is fabricated with specially shaped steel tubes to increase its structural rigidity and strength. It is also designed to be easily disassembled and reassembled for repairs. The guard features a flexible connection between it and the chassis to decrease vibrations. All of these features are responsible for increased operator safety and comfort.
Maintenance Hatch with a Safety Latch - The maintenance hatch opens wide enough to provide easy serviceability of key components. The safety latch prevents the hatch from compromising operator safety when using the truck. |
RELIABILITY |
New Integrated Fuse Box - The next generation of integrated fuse box has been added to the truck. It offers a better layout, ease of service and maintenance, and is waterproof. The entire truck is equipped with waterproof connectors to increase the electronics’ reliability.
Reliable Hydraulic System - The hydraulic system has a longer service life and an increase in efficiency thanks to the optimized hydraulic breather structure with a built-in return oil filter and the load-sensing hydraulic steering system.
Optimized Cooling System - The cooling system has been designed to maximize cooling and increase the reliability of the engine when working under heavy loads. This system uses an aluminum radiator, an independent oil cooler, an optimized heat transfer channel, and a dual-hole counterweight to increase cooling efficiency.
Steering Axle - The steering axle uses large conical bearings on the master pin, buffer blocks, and a large-diameter steering cylinder to substantially increase the reliability and service life of the steering system.
Tilt-Back LP Bracket - The tilt-back cylinder holder makes replacing the LPG cylinder and opening the maintenance hatch for service easy. |
|
HANGCHA IC Pneumatic Forklift (3,000-7,000 LBS)
|
Quick Look
|
Optimized Cooling System | The forklifts are equipped with large capacity aluminum radiators. These radiators have optimized heat dissipation channels to enhance cooling capabilities. This keeps the engine running reliably in heavy-duty applications. |
COMFORT | In developing the XF Series, comfort and ease of operation were carefully considered. For example, vibration levels were improved by adding compound engine dampers and full-floating powertrain mounts. The rubber damper between the frame and the steering axle, the compound engine damper, and the full floating powertrain achieves a flexible connection between the frame and the driving system. As a result, vibrations are significantly reduced to increase operator comfort. The increased capacity exhaust muffler, intake, and noise shield technology significantly lower the forklift’s noise levels for the operator. Comfortable operating environments for operators contribute to increased productivity. |
RELIABILITY | By focusing on enhancing reliability and reducing downtime, the XF series is able to increase productivity for its end-users. |
Full-Floating Transmission | The new, full-floating, aluminum alloy transmission features excellent heat dissipation and thicker discs to meet the most demanding applications. |
|
HANGCHA Mid Pneumatic Forklift (8,000-11,000 LBS)
|
Quick Look
|
RELIABILITY |
• By focusing on enhancing reliability and reducing downtime, the XF series is able to increase productivity for the end-users.
• The forklifts are equipped with large capacity aluminum radiators. These radiators have optimized heat dissipation channels to enhance cooling capabilities. This keeps the engine running reliably in heavy-duty applications.
• XF series features a rugged design, stamped frame, and an engine hood. The stamped instrument panel, overhead guard, and heavy profile rail mast combine to provide excellent structural rigidity to ensure outstanding reliability and stability in heavy-duty conditions.
• The steering axle uses a large-diameter steering cylinder to substantially increase the reliability and service life of the steering system. |
SAFETY |
• A wide range of technology is applied to ensure absolute safety for both the operator and those in the vicinity.
• The Operator Presence Sensing (OPS) System incorporates a lifting, tilting, and traveling stop function. When the operator leaves the seat, the system automatically locks the lifting/tilting functions and disables the forklift from traveling to ensure safety.
• An optional rear grip with a horn button enhances operational safety while traveling in reverse.
• There is a locking mechanism found on the engine hood, damper, and parking brake for the operator’s safety.
• The throttling device locks the mast in place if there is a hydraulic failure. This adds to the operational safety of the truck. |
ENVIRONMENTAL FRIENDLINESS |
• Hangcha offers these forklifts with either an LPG or Diesel engine. These powerful engines are respectively built to EPA standards and Tier 4F standards. The engines release fewer emissions and create a cleaner work environment.
• The diesel version uses a CUMMINS engine QSF2.8T4F that complies with Tier 4 Final control regulation. The DOC exhaust treatment found on the CUMMINS engine ensures the exhaust satisfy with USA T4F standards. It also provides a reduction in noise There is also minimal maintenance required when operating the CUMMINS engine. |
COMFORTABLE OPERATION |
• In developing the XF Series, comfort and ease of operation were carefully considered. For example, vibration levels were improved by adding compound engine dampers and full-floating powertrain mounts. Comfortable operating environments for operators also contribute to increased productivity.
• The rubber damper between the frame and the steering axle, the compound engine damper, and the full floating powertrain achieve a flexible connection between the frame and the driving system. As a result, vibrations are significantly reduced to increase operator comfort.
• The increased capacity exhaust muffler, intake, and noise shield technology significantly lower the forklift’s noise levels.
• The new relocated, easy-to-see LCD insturment display lets the operator check on all aspects of operational status with a glance.
• The new automobile-style light/turn-signal stalk and the forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity.
• Optimal visibility in all directions creates the best conditions for relaxed and safe working. These conditions promote high productivity among the operators.
• The small diameter steering wheel, with tilt adjustment, provides an optimal driving position for the operator. The superior responsiveness of the steering wheel optimizes maneuverability even in narrow spaces.
• The parking brake was developed to reduce the operational force by 30%.
• The automobile-style suspended pedals provide a more ergonomic, operator-centered experience.
• The foot space is now 90% wider to significantly reduce operator fatigue. The new wide, non-slip step makes getting in and out of the forklift safe and easy.
• The easy-to-operate levers provide total load handling operation. The armrest is provided to reduce fatigue. The optional electro-hydraulic proportional control system gives the forklift the ability to make load handling more sensitive and precise.
• In addition to the soft landing system, the soft lifting system is adopted (front lifting cylinders of the full free-lift stage 2 & 3 masts). As a result, the noise and shock of the mast significantly decrease when lowering materials.
• The front lifting cylinders were redesigned with a smaller outer diameter to give the operator superior forward visibility. The double lifting cylinders also provide better forward visibility. |
|