• 2,500 - 4,500 lbs. Lifting Capacity
  • Single Reach Model
  • Double Reach Model
  • Length to forkface 76.2 - 88.3 in
  • Mast Lowered Height 113 - 135 in
  • Overall Width 43 - 61 in

Toyota's electric Reach Trucks deliver on efficiency, safety and performance like never before. With many new, unique features coupled with the longstanding productivity, ergonomics and low cost of ownership you expect from Toyota, the Toyota Reach Truck line opens up new opportunities in warehouses and distribution centers.


  • 24V Electrical System
  • 36V Electrical System
  • Variable Speed Lift and Lowering
  • Electric Power Steering Motor
  • Two Speed Reach/Retract
  • Current Controlled Proportional Valve
  • Coast Control
  • Multifunction Control Handle
  • Interactive Digital Display Panel
    • - Multifunctional Hour Meter
    • - Time & Date Display
    • - Programmable Travel, Acceleration, Lift/Lower Speeds, Reach/Retract
    • - Fault Code Memory
  • AC Powered Drive System with Torque Control
  • AC Hydraulic System
  • Lowering Flow Limiter
  • Lift system Relief Valve
  • UL "E" Rating


  • 180-Degree Electronic Power Steering
  • Auto-Position Hold
  • Flexible Dock Stance Operator Compartment
  • Wide-View 3-Stage Mast (FSV)
  • Hydraullically Cushioned Mast Staging
  • Hydraulic Cushioned Retract System
  • Hydraulic Fork Deceleration at Floor Level
  • Lift Slowdown at Max Lift
  • 33 in. to 50 in. Base Leg Openings (ID)
    • in 1 in. increments [2] [3]
  • Polyeurethane Drive Tire
  • Tandem Articulated, Bolt-On
  • Polyeurethane Load Wheels
  • Polyeurethane Caster Wheel
  • Proportional Handle Plugging
  • Tapered Toe Box 5" x 3.63" (9BDRU13, 9BDRU15 only)
  • Universal Dead-Man Pedal w/ Cushioned Pad
  • Electric Disc Brake
  • Regenerative Braking
  • Ventilated Compartment
  • 48" Tilting Load Backrest Extension
  • ITA Class II Hook-Type Carriage
  • Anti-Static Ground Strap
  • Adjustable Speed Limit above Free Lift


  • Bubble Cushioned Padded Floor & Brake Pedal
  • Ergonomically Angled Floorboard
  • Integrated Clipboard & Cup Holder
  • High Visibility Overhead Guard
  • Safety Glass Mast Guard [4]
  • Comfort-Padded Lean Points
  • Cushioned Knee Pad


  • Battery compartment rollers
  • Adjustable battery retaining gates
  • SB350 red connector
  • SB350 gray connector
  • Battery discharge indicator with lift interrupt
  • Self-diagnostics
  • Built-in analyzer
  • Over temperature indicator with protection
    • - on drive & lift motor
  • Emergency power disconnect switch
  • Electric horn
  • Key switch
  • Self-adjusting electric disc brake
  • Enclosed battery compartment
    • - 14.5" x 38.62" x 31"
    • - 16.5" x 38.62" x 31"
    • - 18.5" x 38.62" x 31"
    • - 21.5" x 38.62" x 31


  • Reach Interlock Switch Limits the travel speed if the reach mechanism is extended. Promotes the proper nesting of the carriage before traveling. Traveling with the reach extended can increase wear/damage to the truck and customer's load. The limited speed can be adjusted from 0-3.5 mph.
  • Acculaser Projects a laser line even with the fork tips. Allows the operator to quickly see if the forks are lined up with the pallet opening. Especially helpful on higher rack positions where distance can be more difficult to judge.
  • Height and Tilt Indicator Displays the fork height for the operator and gives an indicator showing if the forks are level or tilted up. Allows the operator to quickly lift to known rack heights, eliminating much of the "creep" that an operator does when getting near the appropriate height. The tilt indicator lets the operator know if the forks are level at tall heights when that is hard to visually determine.
  • Mast Lift Limit Switch with Bypass Allows a height to be preset in the programming. At this height, the mast will stop lifting and a message will display on the screen. To continue lifting, the operator must hold the "up" arrow button and lift. Helpful in locations that have a low ceiling height or low obstacles, but have an area with a rack position above the obstacle or with a different ceiling height.


Model Number Load Capacity* (lbs.) Max. Travel Speed Full Load (MPH) Max. Lift Speed Full Load (FPM) Max. Gradeability Full Load (%) Basic Right Angle Stack** (IN.)
9BRU18 3,500 6.5 (24V) 7.5 (36V) 40 (24V) 70 (36V) NA NA
9BRU23 4,500 7.5 65 NA NA
9BDRU13 2,500 6.5 40 NA NA
9BDRU15 3,000 7.5 75 NA NA

* Based on 24" load center.
** Add load length and clearance.